Tag Archives: homemade birdfeeder

Putting another homemade bird feeder to the test

Posted on by
4
Photo by Chris Bosak A white-breasted nuthatch takes a sunflower seed from a homemade platform feeder in March 2017, in Danbury, Conn.

Photo by Chris Bosak
A white-breasted nuthatch takes a sunflower seed from a homemade platform feeder in March 2017, in Danbury, Conn.

I know I’m not breaking any ground with the design of this homemade bird feeder, but figured I’d share it anyway. I’ve been wanting a platform feeder for a while now. The ones I made last year simply by cutting a thin section of a tree trunk with a chainsaw worked for a few months, but I didn’t treat them and they dried up, cracked warped and eventually fell apart.

On to plan B, which was to check out some offerings at stores. I saw one I liked but its design was so simple I couldn’t justify spending money on it. So I mulled it over and procrastinated for a long while before heading into the basement to sift through the scrap wood left by the previous owners of the house.

Almost right away I found an old, wooden cabinet door. The bottom (or inside) already had two thin pieces of wood running near the edges. All I had to do was add two more pieces to close the box and keep the seed contained and I would be done. Just as easily said than done.

The only tricky part was getting it to hang straight, or at least relatively straight. The small chain I used at first just wasn’t cutting it. It would hang low on one end so I’d adjust the links and only make it worse. So I dug out some old carabiner/keychain tchotchkes and linked the same number on each side of the feeder. It still didn’t hang perfectly straight, but that’s fine because I like it slightly angled toward the house anyway. Also, the angle will allow for drainage in heavy rains. (I love when I can justify flaws in my creations.)

As you can see, it’s also a fairly sizable feeder so I can offer a variety of foods at once. It’s working great already and I look forward to sharing photos of future visitors. It’s got rose-breasted grosbeak written all over it. Time will tell.

Photo by Chris Bosak A white-breasted nuthatch takes a sunflower seed from a homemade platform feeder in March 2017, in Danbury, Conn.

Photo by Chris Bosak
A white-breasted nuthatch takes a sunflower seed from a homemade platform feeder in March 2017, in Danbury, Conn.

 

More photos of birds using the homemade feeder

Posted on by
2
Photo by Chris Bosak A White-breasted Nuthatch checks out a new bird feeder in Danbury, Conn., March 2016.

Photo by Chris Bosak
A White-breasted Nuthatch checks out a new bird feeder in Danbury, Conn., March 2016.

As promised, here are a few more photos of birds using the feeder that my 12-year-old Andrew and I made last week. Here’s the original story in case you missed it.

More photos by clicking below.

Continue reading →

New homemade bird feeder works right away

Posted on by
3
Photo by Chris Bosak A Tufted Titmouse takes a peanut from a new bird feeder in Danbury, Conn., March 2016.

Photo by Chris Bosak
A Tufted Titmouse takes a peanut from a new bird feeder in Danbury, Conn., March 2016.

Andrew, my 12-year-old son, has the week off of school. We did some traditional school’s-out activities, such as going to the movies, bowling, and just hanging around, but we set aside one day to work in the yard. (Well, I set it aside. He likely would not have chosen chopping and stacking wood as a day-off activity.)

But there we were: Chopping away and stacking them up. I broke out the chainsaw to cut some logs to fireplace length. There was one particularly large piece of wood so I decided to cut off a thin circle to make it into a homemade bird feeder. I had been wanting a platform feeder, but it seemed silly to spend money on something with such a simple design. I’m not big on making things and my “handy skills” are OK, but certainly not great. People who know me may even think that “OK” is pushing it.

But how hard could this be? A platform feeder is basically a large base and sides to keep the seeds from spilling out. Once I cut the circle, I cut in half some small pieces of a maple we recently took down as it was too close to the house. As I did that, Andrew drilled holes in the circle for drainage. We put a nail through the bottom of the circle near the edge, then pounded a piece of maple onto the nail. We continued until the circle was completely lined. It looks … well, let’s say rustic. That’s the look I was going for anyway.

I didn’t have chains or hooks to hang it up yet, so for the time being I just rested it on the railing of the deck. Andrew and I cleaned up the yard for the day and finally I put a handful of seed and a few peanuts on our new feeder.

I went inside for a long drink of water and to wash my hands. After drying my hands, I glanced out the window and two Tufted Titmice were already on the new feeder. It took all of about five minutes for it to get used. It is placed near the regular feeding station so it’s not like it had to be discovered, but it was still neat to see it being used _ especially so quickly.

Over the next 15 minutes or so, chickadees, Downy Woodpeckers, White-breasted Nuthatches and even American Goldfinches gave it a shot. The squirrels came later, of course.

Not a bad way to finish off a day of working in the yard.